(from wikipedia…)

The BMW 8 Series (chassis code: E31); is a V8 or V12-engined 2-door 2+2 coupe built by BMW from 1989 to 1999. While it did supplant the original E24 based 6 Series in 1991, a common misconception is that the 8 Series was developed as a successor. However, it was actually an entirely new class aimed at a different market, with a substantially higher price point and better performance than the 6 series. It was BMW’s flagship car and had an electronically limited top speed of 155 mph (250 km/h).

Design of the 8 Series began in 1986, with construction starting in the same year. The 8 Series debuted at the Frankfurt Motor Show (IAA) in early September 1989. The 8 Series was designed to move beyond the market of the original 6 Series. The 8 and 6 Series cars were distinctly different in design, though both were considered Supercars. The 8 Series however had substantially improved performance, as well as a far higher purchase price.

Over 1.5 billion Deutschemark was spent on total development (2008 USD nearly $1 billion). BMW used CAD tools, still unusual at the time, to design the car’s all-new body. Combined with wind tunnel testing, the resulting car had a drag coefficient of 0.29, a major improvement from the previous BMW M6/635CSi‘s 0.39.

The 8 Series supercar offered the first V-12 engine mated to a 6-speed manual gearbox on a road car. It was also the first vehicle with an electronic “fly-by-wire” throttle. The 8 Series was one of BMW’s first cars, together with the Z1, to use a multi-link rear axle.

While CAD modeling allowed the car’s unibody to be 8 lb (3 kg) lighter than that of its predecessor, the car was significantly heavier when completed due to the large engine and added luxury items—a source of criticism from those who wanted BMW to concentrate on the driving experience.

Sales of the 8 Series were affected by the global recession of the early 1990s, the Persian Gulf War, and energy price spikes. BMW pulled the 8 Series out of the North American market in 1997, selling only 7,232 cars over seven years. BMW continued production for Europe until 1999. The ultimate worldwide production total was 31,062.

Models

830

Although sales were good in the first year on sale, the sharp reduction of the expensive 850i sales prompted BMW to develop an entry-level model. This was to use the 3-liter V8 with 218 PS (160 kW; 215 hp) from the 530i and 730i, known internally as the M60B30. Eighteen cars were produced, 13 of which had an automatic gearbox fitted. The model was dropped in favor of the 840Ci and all 18 development cars were dismantled.

840Ci

The 840Ci exists with two different engine packages. The first used the 4 liter M60B40 engine with 286 PS (210 kW) and was produced from mid 1993 to late 1995. From mid-1995, production phased in the newer 4.4 liter M62B44 engine, which had better fuel economy and more torque, though power output remained unchanged.

The 840Ci was available with a 5-speed automatic transmission, though European cars were given the option of a 6-speed manual transmission. The only external features distinguishing the V8 model from the V12 models were the quad round exhausts, which were square in the V12 models. The 840Ci stayed in production until mid-1999.

850i

This was the first model launched in 1990 with the 5 litre M70B50 V12 engine producing 300 PS (221 kW; 296 hp). It was available with either a 4-speed automatic or a 6-speed manual gearbox.

850Ci

There is some confusion over why and when the 850i became the 850Ci. The change happened around the introduction of the 850CSi and it is believed that BMW decided to include the “C” in the model name that denotes ‘Coupe’ just as two-door 3 Series cars alongside the 8 Series read 323Ci, 328Ci and so on. The confusion starts when BMW installed the new M73B54 engine in the car. This was not an immediate changeover, and indeed both the M70 and M73-engined cars rolled off the production lines side-by-side for about nine months in 1994, both named 850Ci.

As the capacity of the M73 increased to 5.4 liters and the compression ratio went up, the power output rose to 326 PS (240 kW; 322 hp).

850CSi

As a top-of-the-range sports tourer, the 850CSi took over from the prototype M8. The 850CSi used the same engine as the 850i, which was tuned so significantly that BMW assigned it a new engine code: S70B56. The modifications included a capacity increase to 5.6 liters and power increase to 380 PS (279 kW; 375 hp).

The 850CSi’s modified suspension included stiffer springs and dampers and reduced the car’s ride height. The recirculating ball steering ratio was dropped 15% over the stock E31 setup. The model also sported wider wheels, with the option of forged alloys. The front and rear bumpers were reshaped for improved aerodynamic performance. Four round stainless steel exhaust tips replaced the square tips found on other models. The 6-speed manual gearbox was the only transmission option. In Europe all 850CSi’s came with Rear Wheel Steering (AHK – Aktive Hinterachs-Kinematik).

Production ended in late 1996 because the S70 engine could not be modified to comply with new emission regulations without substantial re-engineering.

M8

Originally envisioned as a Ferrari competitor, only a single prototype BMW M8 was ever produced, equipped with a special 550 bhp (410 kW; 558 PS) version of the S70 engine, essentially a bored out version of the M70 with experimental multi-valve cylinder heads. A common misconception is that this engine powered the McLaren F1. However, when this was suggested to McLaren’s designer Gordon Murray, the idea was rejected because the engine was too heavy and long for the McLaren F1. A completely new BMW engine was designed which has a closer resemblance to the later Euro S50B30 BMW M3 engine.

The project was eventually scrapped because BMW decided that there was no market for an M8. The only prototype ever produced (one that was reportedly not even road safe) was locked away by BMW in the company’s Giftschrank (poison storage). BMW and the M Division had strongly denied that the car was even a possibility since the initial stages of its development. A world exclusive feature in the February 2010 issue of BMW Car Magazine, however, revealed that the M8 prototype still exists in its entirety. The car was unveiled for the first time in front of journalists on July 2, 2010 at the BMW Museum in Munich.

While the M8 was never mass produced, it is interesting to note that the 850CSi was also tuned by BMW’s M division. Aside from sporting an M-tuned engine (as identified by the S suffix instead of the M prefix that a non-M tuned engine would wear), the car’s VIN identifies the car as being built by BMW Motorsport (identified by the WBS prefix) instead of BMW AG (WBA prefix). This effectively identifies the 850CSi as essentially a detuned version of the M8.

B12

BMW tuner Alpina produced a special version of the 8 Series dubbed the B12. Two versions were produced, both taken from the standard production line.

B12 5.0 Coupe was based on the 850i, powered by the 5.0-liter M70 engine producing 350 bhp (261 kW; 355 PS), and available only with a 4-speed automatic gearbox.

B12 5.7 Coupe was based on the 850CSi, with the 5.7-litre S70 engine producing 416 bhp (310 kW; 422 PS) with a 6-speed manual gearbox.